Electrophoretic Coating E-Coat Line For Electric Car Body

Electrophoretic coating equipment can be divided into two categories: continuous passing type and intermittent lifting type. The continuous passing type electrophoresis equipment is suitable for large quantity coating production and widely used in industry; while the intermittent vertical lifting type, the initial form of which is a monorail electric hoist with manual control, is suitable for smaller quantity coating operation.

In recent years, with the progress of computer technology, mechatronics technology is developing rapidly, with microcomputer control of vertical lift program-controlled trolley has been applied in the coating production line, it is the same batch of electrophoresis equipment through the continuous compared to the length of the production line is significantly shortened, and has the advantage of flexible changes in the process.

The equipment for electrophoretic coating consists of pre-treatment device, electrophoretic tank, stirring device, filtering device, temperature regulating device, paint management device, power supply device, washing device after electrophoretic coating, ultra-filtration device, drying device, backup tank and so on.

·Electrophoretic coating is one of the effective methods for coating metal workpieces. As a new type of coating which is low-pollution, energy-saving, resource-saving, protective and anti-corrosive, electrophoretic coating is characterized by flat coating film, good water resistance and chemical resistance.

·Electrophoretic coating line is a special coating method in which the coated material with conductive property is immersed into the electrophoretic coating tank equipped with low concentration of diluted water as anode (or cathode), and another cathode (or anode) corresponding to it is set up in the tank, and after circulating direct current between the two poles for a certain period of time, an even and delicate coating film which is not dissolved by water is deposited on the surface of the coated material.

·Electrophoretic coating has a high penetration rate, which can be completely dissolved or emulsified in water, and the viscosity of the prepared tank liquid is very low, so it is easy to penetrate into the pocket-like structural parts and crevices of the coated objects, which is especially suitable for the surface coating of shaped conductive materials.

·Electrophoretic coating has a high penetration rate, which can be completely dissolved or emulsified in water, and the viscosity of the prepared tank liquid is very low, so it is easy to penetrate into the pocket-like structural parts and crevices of the coated objects, which is especially suitable for the surface coating of shaped conductive materials.