Manual Electrostatic Powder Coating Line

Powder coating booth + oven + conveyor + manual spray gun kit

Manual powder spraying line process flow: loading – powder spraying - drying – unloading, each process needs to be operated manually. This is a suitable solution for many manufacturers when the characteristics of the product, the batch size is not very large, the physical space is limited, and the investment costing is not very large.

Material: galvanized sheet or stainless steel

Specification: length - height - width can be made according to customer requirements, but the general basis is the size of the workpiece, production requirements and other factors

Process: electrostatic spraying when the powder in the spray chamber by the role of four forces: the gun powder tube in the compressed air thrust, charging by the electric field force, their own gravity and the absorption of airflow, the combined result of these four forces is part of the powder adsorption to the surface of the workpiece, part of the powder settled in the bottom of the spray chamber, the spray chamber wall, and other powders floating in the air with the recycling of the airflow into the device.

Recycling device: the cartridge group recycler is characterized by a cylindrical cartridge shape, the cartridge surface made accordion folding, the cartridge group volume is not large, but the total area of filtration is much larger than the fiber bag. The paper surface of the cartridge after special resin treatment not only does not absorb moisture, but also has the mechanical strength to improve the resistance to pulse blowback airflow.

Fan: according to the different specifications required by the customer to match the high-pressure special powder cabinet centrifugal fan

Lighting: LED explosion-proof lamps, the specific number according to the actual situation

Oven working principle: through the digital display instrumentation and temperature sensor connection to control the temperature, using hot air circulation air supply mode, hot air circulation system is divided into horizontal and vertical type. After precise calculation, the air source is driven by the air motor to drive the wind wheel through the electric heater, the hot air will be sent to the air duct into the oven studio, and will be used after the air into the air duct to become a source of wind and then circulate the heating application, so that the temperature uniformity can be effectively improved. If the door of the oven is switched on and off during use, the air circulation system can be used to quickly restore the temperature value of the operation status.

Electric control: circuit breaker, contactor, air switch and other components using domestic and foreign well-known brands.

Application: Mainly used for electrostatic powder spraying of hardware products.

1. Easy to assemble and disassemble

2. Suitable design of loading and unloading parts

3. Suitable track design for different conveyors

4. Good drive unit, easy to drive the whole system

5. Advanced design with high quality electrical components

6. Excellent durability and low-maintenance

1. Go through your budget, required daily output and manpower, and give you a theoretical basis of manual system.

2. Decide operation and conveyor mode: Manual or semi-automatic

3. Check the painted workpieces including maximum weight, size, heating energy, voltage and others, and then work on conveyor track design and relative data configuration, give you a proposal.